How to Fix Common Mazda 3 Key Problems
The Mazda 3 is an elegant compact car that features a luxurious interior and agile handling. It's also a good bargain compared to other compacts on the market.
It's a real hassle to lose keys. Not only does it mean you'll be paying the dealership to tow your vehicle and reprogramme your key as well, but it could also cost money to replace spare keys.
Key not locking or unlocking doors
It is dangerous to leave the doors unlocked especially when the vehicle is moving. If the door is not locked when the vehicle is moving, passengers may get out of the vehicle or suffer injuries. Keep mazda key fob replacement near me out of reach of children to avoid this problem. Children might find them interesting and enjoy playing with them. This could cause the power window or other controls to malfunction and even move the vehicle.
If you notice the key fob doesn't lock or unlock the doors, the battery might be dead. The button cell battery on the key fob has a limited time span, so it's essential to replace it frequently. A good battery is expected to last between two and three years. When replacing the battery, it is essential to choose a battery with the same size and voltage as the original.
A key pairing issue may also be the cause of your key fob not working. It's possible that the keyfob was not properly associated with the vehicle when it was purchased. In this situation, it will need to be reprogrammed by the dealership. Fortunately, this can be done within a matter of minutes. The dealership can also reset the on-board computer to eliminate any remaining electricity. However, this does not alter the key fob's capability to lock or unlock doors.
Dead coin battery
If your key fob won't be activating or unlocking your car, it may be because the battery is dead. This is a common problem however, it is easily solved. You can replace the battery on your own, avoiding going to the dealer. The process is simple and requires just the use of a few tools.
Then, press the auxiliary key button on the back of your Mazda flip key. This will open the metal auxiliary key and let you take it off. Once the metal auxiliary key is removed, you'll notice an opening on either side of the fob case. Begin with one side of the case and work your way around using a tape-wrapped screwdriver. Gently pry the two halves of the case apart and put them aside.
You can now change the battery on your key fob. Be careful not to damage the small rubber ring the battery is placed on. Once the battery is replaced, you can put it back into the case and enjoy your new key fob!
You can find an alternative battery in most stores that sell batteries. Look for a CR2025 coin cell battery. These batteries are usually used in watches and calculators however they can also be found at auto parts stores as well as online. It's simple and fast to replace the battery in your Mazda 3. This will save you money by avoiding an appointment with a dealer.
Key pairing issue
If you've been driving your Mazda 3 for a long time and suddenly it stopped working, it may be a problem in the remote keyless system receiver module. This could happen when the chip inside the key fob has been damaged. This can be caused by many factors like an unintentionally dropped or wet key.
Fortunately the key fob's electronic chips are protected by rubber seals and should be fine even with splashes of water. The key fob's submersion in the ocean or pool water could be a major issue because salty water is highly conductive and could harm the electronic components.
If your key fob has stopped working, it's likely that you're in need of an upgrade to the battery. You can locate a variety of third-party batteries on internet. It's important to bear in mind that these batteries might not be compatible with your Mazda 3. It is recommended to purchase from a dealer to make sure that it is compatible with your Mazda 3.
After replacing the battery, you'll be able use your key fob again. If the remote isn't responding when you press the lock button, it is probably stuck in power-saving mode. Press the lock button five times and hold it until the red light turns on.
Reprogramming a key
The keyless entry system in the Mazda allows you to unlock and start the car without the traditional key. It's an excellent convenience, however the process of reprogramming the remote or key can be confusing for some. It also requires a machine that only the dealer or an automotive locksmith can access. The machine is connected to the computer in the vehicle and it starts the programming process for a new key or remote.
The first step is to ensure that you have at least two functioning keys for the Mazda. Then, you can proceed with the reprogramming procedure of a spare key. Initially, the functions of the new FOB are turned off to safeguard the car from theft. After you've reprogrammed your new key, it is possible to activate these functions and again.
You can now use the new key for the ignition and also to open the doors. Test it first to make sure it works. Keep a spare set of keys in case you are concerned about losing your keys.
Incorporating a spare car key into your Mazda is a fairly simple procedure. Just follow these steps and you'll save a considerable amount of money, as you don't have to pay the dealership to complete the task for you. This will also help you avoid the expense of a tow and save money on a new spare key.